home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Libris Britannia 4
/
science library(b).zip
/
science library(b)
/
HAMRADIO
/
SWL114.ZIP
/
swlog.cfg
< prev
next >
Wrap
Text File
|
1991-12-11
|
3KB
|
98 lines
#
# SWLOG.CFG -- Configuration file for Short Wave Log
#
# Version 1.13
#
# All lines starting with a pound sign are treated as comments.
#
#------------------------------------------------------------------------------
#
#
# If you have registered Short Wave Log, then you have been
# provided with a registration number. Enter it here
# after the colon. Also enter your name and address in the
# few lines. This information is used in the QSL Writer.
#
[registration number:put it here]
[user name:your name here]
[address:your street address here]
[city:your city, town, or borough here]
[state:your state or province here]
[postal code:your ZIP, ZIP+4, or postal code here]
[country:your country here]
#
#
#------------------------------------------------------------------------------
#
#
# Use the BIOS to write to the screen. This is only needed
# if using an old non-IBM compatible PC. Vaild options
# are yes or no.
#
[bios:no]
#
#
#------------------------------------------------------------------------------
#
#
# Eliminate snow on CGA monitors. If Short Wave Log causes
# "sparklies" on your CGA monitor, use this option.
#
[cga:no]
#
#
#------------------------------------------------------------------------------
#
#
# The browse function of Short Wave Log is housed in a
# separate executable file: BROWSE.EXE. When called,
# the main Short Wave Log program is swapped out of
# memory so that the browse function can run. Short
# Wave Log is also swapped out of memory if the OS Shell
# option is chosen or if a QSL request is edited.
# If your system has EMS, the program is swapped to EMS.
# If you system has XMS, then it is used. If neither
# EMS or EXS memory is present, Short Wave Log is swapped
# to disk. Some memory managers are incompatible with
# the memory swap. If your system crashes from a swap,
# you can force swapping to disk with this option.
#
[swap to EMS/XMS:yes]
#
#
#------------------------------------------------------------------------------
#
# The default time zone for the clock is GMT/UTC. If
# local time is desired, set it here.
#
[local time:no]
#
#
#------------------------------------------------------------------------------
#
# The default is for color. If a monochrome or Hercules
# card is used, set it here.
#
[monochrome:no]
#
#
#------------------------------------------------------------------------------
#
#
# If you prefer to view your frequencies in MHz rather than
# kHz, set it here. Once again the valid options are yes and no.
#
[MHz:no]
#
#
#------------------------------------------------------------------------------
#
#
# When a QSL request is created, it can be edited. Set this
# option to your favorite ASCII editor.
#
[editor:c:\utils\em.exe]
#
#
#------------------------------------------------------------------------------